Technical Guidance Notes

As with all documents of this nature, the guidelines are dependent on feedback from industry and other interested parties. Suggestions on improvements to these guidelines are welcome and should be addressed to Weld Australia(formerly known as the WTIA).

DISCLAIMER

While every effort has been made and all reasonable care taken to ensure the accuracy of the material contained herein, the authors, editors and publishers of this publication shall not be held to be liable or responsible in any way whatsoever and expressly disclaim any liability or responsibility for any loss or damage costs or expenses howsoever incurred by any person whether the purchaser of this work or otherwise including but without in any way limiting any loss or damage costs or expenses incurred as a result of or in connection with the reliance whether whole or partial by any person as aforesaid upon any part of the contents of these Fume Minimisation Guidelines.


Document Library

File Type Size Date  
Weld Australia Technical Guidance Note TGN-SG01: A Guide to AS/NZS ISO 9606-1: 2017 pdf 1 MB 19 Dec, 2018 Download
Weld Australia Technical Guidance Note TGN-SG02: AS/NZS 9606-1 A Summary of Changes pdf 1 MB 19 Dec, 2018 Download
Weld Australia Technical Guidance Note TGN-SG03: AS/NZS 2980 - A Summary of Changes pdf 1 MB 19 Dec, 2018 Download
Weld Australia Technical Guidance Note TGN-PG01 - Weld Defects pdf 2 MB 19 Dec, 2018 Download
Introduction to Fume Minimisation Guidelines: Welding, Cutting, Brazing and Soldering pdf 13 KB 19 Dec, 2018 Download
Fume Minimisation Guidelines: Welding, Cutting, Brazing and Soldering pdf 3 MB 19 Dec, 2018 Download
Weld Fume Control & Extraction pdf 258 KB 19 Dec, 2018 Download
Weld Australia Technical Guidance Note TGN-R-02 Welding Fume Mitigation Manganese Steel Rail pdf 204 KB 19 Dec, 2018 Download
Weld Australia Technical Note TN-25: Welding Specification for the water industry pdf 731 KB 19 Dec, 2018 Download